it is a thread for "How to Restore ROM using SP Flash Tool". It's actually very similar on how we flash fastboot ROM in Redmi Note. To prevent more unnecessary questions, here's the exact fastboot flashing procedures, which I have tested Fastboot v37 Malaysia Version on my own Redmi Note 3G WCDMA and it works perfectly! 
Preparation:
Procedures:
Step 1: Download and Install Android USB Drivers on your PC.
Step 2: Power off your Redmi Note and remove battery from it.
Step 3: Download Fastboot ROM and extract it into your PC.
Step 4: Download and extract SP Flash Tools on your PC.
Step 5: Right click on Flash_tool.exe and click on "Run as adminstrator".
Step 6: After launched SP Flash Tools, click on Scatter Loading.
Step 7: Locate the Scatter file named "MT6592_Android_scatter.txt" in your Fastboot ROM folder. It can be found in images folder.
Step 8: Now, press Download as shown in picture below. Then connect your phone to PC through USB cable.Replug your phone if there's no Red Bar loaded in flash tool. (As Redmi Note has USB disconnection bugs)
Step 9: Once your device is detected, you will see a Red bar below the tool, and wait for the yellow bar to reach the end.
Step 10: A big green tick will appear when flashing progress is finish.
Step 11: Insert your battery and reboot your phone.
Step 12: Please be patient as first time reboot needs at least 2-3 minutes.
Step 13: When you saw the images below, you have successfully flash a fastboot ROM on your Redmi Note!
Download Links:
Android USB Drivers: Download
SP Flash Tool Version 5.1352.01: Download
Fastboot ROMs download link: http://en.miui.com/thread-53193-1-1.html
References Source from XDA
Preparation:
- Android USB Drivers
- SP Flash Tool
- Fastboot ROM (Currently for Singapore and Malaysia only)
- Redmi Note 3G WCDMA (any MIUI version)
- Laptop or Desktop PC
- Xiaomi USB cable
- Please Back Up your files before flashing Fastboot, as it will erase all your data!
- Download links are at the end of the installation guide.
- Fastboot Mode is not needed for this flashing method.
- You can use this method to unbrick your phone!
Procedures:
Step 1: Download and Install Android USB Drivers on your PC.Step 2: Power off your Redmi Note and remove battery from it.
Step 3: Download Fastboot ROM and extract it into your PC.
Step 4: Download and extract SP Flash Tools on your PC.
Step 5: Right click on Flash_tool.exe and click on "Run as adminstrator".
Step 6: After launched SP Flash Tools, click on Scatter Loading.
Step 7: Locate the Scatter file named "MT6592_Android_scatter.txt" in your Fastboot ROM folder. It can be found in images folder.
Step 8: Now, press Download as shown in picture below. Then connect your phone to PC through USB cable.Replug your phone if there's no Red Bar loaded in flash tool. (As Redmi Note has USB disconnection bugs)
Step 9: Once your device is detected, you will see a Red bar below the tool, and wait for the yellow bar to reach the end.
Step 10: A big green tick will appear when flashing progress is finish.
Step 11: Insert your battery and reboot your phone.
Step 12: Please be patient as first time reboot needs at least 2-3 minutes.
Step 13: When you saw the images below, you have successfully flash a fastboot ROM on your Redmi Note!
Download Links:
Android USB Drivers: DownloadSP Flash Tool Version 5.1352.01: Download
Fastboot ROMs download link: http://en.miui.com/thread-53193-1-1.html
References Source from XDA
0 comments:
Post a Comment